Brewery, Manchester

Project Information

Project:
Brewery, Manchester

Design Standard:
British Standard & Eurocodes

Category:
Structural Design

Summary

GCS was appointed as a subconsultant to provide structural engineering services to this project.

The client wishes to construct a new independent storage building within the site. The building itself is to be provided by a temporary building supplier. Our scope is to design the foundations to support the temporary structure and ground slab to support a pallet loading of 35kN/m², fork lift wheel load and vehicle’s wheel load.

In addition to the new independent storage building, GCS was also involved in the heat recovery project at the same site. The proposal is to convert the existing basement to house the machineries with a new mezzanine floor structure.

GCS provided the substructure design for the new building and new mezzanine floor design for the refurbishment, for tender and construction purposes. We were also responsible for responding to queries during tender and construction stage.

Similar Posts

  • Food Processing Plant, Bristol

    Project Information Project:Food Processing Plant, Bristol Design Standard:British Standard & Eurocodes Category:Model Assessment; Structural Assessment & Design Summary GCS was appointed as a subconsultant to provide structural engineering services to this project. This project was carried out in stages. Initially we carried out a review of the existing structural analysis models provided by the client…

  • Food Processing Plant, Skelmersdale

    Project Information Project:Food Processing Plant, Skelmersdale Design Standard:British Standard & Eurocodes Category:Structural Assessment Summary GCS was appointed as a subconsultant to provide structural engineering services to this project. The client required an assessment of the existing mezzanine floor to support proposed scaffolding. A 3D structural analysis model was created and an assessment report was prepared…

  • Montague Street, Birmingham

    Project Information Project:Montague Street, Birmingham Design Standard:British Standard & Eurocodes Category:Structural Assessment Summary GCS was appointed as a subconsultant to provide structural engineering services to this project. The building was previously a warehouse and we are tasked to carry out a structural assessment to the existing building to support the proposed equipment loading. During the…

  • Brewery, Burton-on-Trent

    Project Information Project:Brewery, Burton-on-Trent Design Standard:British Standard & Highway Standards Category:Structural Strengthening Design Summary GCS was appointed as a subconsultant to provide structural engineering services to this project. The proposal is to install two new 3” pipes to the existing pipe bridge. The existing pipe bridge is a two-span bridge with circa 29.2m clear span,…

  • Brewery, Tadcaster

    Project Information Project:Brewery, Tadcaster Design Standard:Eurocodes Category:Structural Design Summary GCS was appointed as a subconsultant to provide structural engineering services to this project. A new building is proposed for a brewery in Tadcaster. The proposed building is a single storey CO2 recovery building housing the equipment such as gaswasher, CO2 compressors, pre-cooler, Economiser, water pump,…